Automatic body welder for food can production with spares
With Mitsubishi full servo motion control system
Main configurations:
Mitsubishi motion controller, PLC, inverter, servo motors (totally 4 servo
motors respectively for body blank sucking, can body pushing, can body
feeding and copper wire), power module; Omron relay; Schneider
contactor and switches; Siemens air switch; SMC/MAC solenoid valves
Ceramic copper wire flattening rollers, guide wheels & Z bars
With remote control system
Including one set of calibration toolings for 73mm
Can diameter range: 52-176mm
Can height range: 63-260mm(320mm)
Tinplate thickness range: 0.16-0.3mm
Copper wire diameter: 1.28/1.38mm
Max. production speed: 220CPM
Welding frequency: 100-350Hz
Welding tail: no more than 0.1mm
Welding speed: 18-26m/min
Overlap: 0.3-0.8mm
Air consumption: ＞0.5MPa, 300L/min
Cooling water: ＞0.4MPa, 12-20°C, 60L/min
Voltage: AC 3-phase 380V 50Hz
Power: 30Kw
Weight: about 3000Kg
Dimension: 2000*1600*1800mm
External welding seam lacquer spray coating system
For protection of the outside welding seam
With Nordson spray nozzle
Including transfer conveyor
AirTac PLC controller and pneumatic components, Omron relay,
Weinview HMI
Can diameter range: 52-350mm
Can height range: 50-600mm
Coating speed: 25-50m/min
Coating width: 8-18mm
Compressed air: 0.4MPa/mm²
Voltage: 380V 50Hz
Weight: about 500Kg
Dimension: 1800*600*1300mm
Internal welding seam powder coating system
For protection of the inside welding seam
SMC pneumatic components; Omron PLC, colorful touch panel
and relay; Schneider inverter and contactor; Siemens switches
Applicable can dia.: 52-350mm
Transfer speed: 10-50m/min
Coating width: 6-14mm
Power: 2.5Kw
Voltage: AC 220V 50Hz
Air pressure: 0.5MPa, 300L/min
Weight: about 500Kg
Dimension: 900*900*2200mm
Automatic high-frequency induction curing oven for can bodies
(new model)
Including 4 sets of induction heads
With automatic transfer conveyor lifting machanism
Omron PLC, colorful touch panel and relay; Schneider inverter
and contactor
Applicable can dia.: 45-176mm
Applicable can height: 45-600mm
Production capacity: above 220CPM
Cooling water: ＞0.4MPa, 12-20°C, 40L/min
Air consumption: ＞0.5MPa, 50L/min
Voltage: AC 3-phase 380V 50Hz
Power: 4-8Kw
